Making Water System Installation Faster And Smarter.

Features

• Temp control mixes cold + hot to get temp right every time.
• Suitable for shower and kitchen, cold and hot.
• Clean drinking water outlet.
• Tank input connection.
• Alternative external pickup / bucket connection.
• Grey water tank connection with failsafe contamination protection.
• Connects to any water heater available today. (Duoetto 10L)
• Twin 12V pumps for switched supply (Seaflo 3.8 LPM Water Pumps)
• Saves water, time and money!
• Weight: 5 Kgs
• Dimensions : 380mm (W) with mixer and connectors included, 290mm (H) , 90mm (D)

INSTALLATION AND OPERATIONS MANUAL

Connections

The Water hub by itself come with a qk series connector for each pump. One has a female end and the other male. If you are purchasing the water hub without the eletric connection kit, you will need to purchase  the Qk series 2-way connectors here:

perthpro.com.au/products/qk-series-250-connector-kit-black-2-way

Alternatively, you can remove the connectors attached to water hub and replace with ones of your choosing. 

Electric Connection Kit (Optional)

The electrical connection kit is sold separately or in the correctly selected kit above, however you can decide whether you want it pre-assembled on the box or in a kit separately if you would like to install the switches in another location on the vehicle to make them easier to access or you want the box slipped away somewhere. 

The electric connection kit includes 2 LED on/off switches and a 4 meter cable to connect to power. Each switch harness connect to each pump.

 If you would like the connection kit pre assembled to the box, it is an extra charge of $50. You will be prompted with a pop-up option once you’ve add the kit that include the electrical kit to your cart.

Hose Kit (Optional)

The Hose kit has 3 components including

• Shower head hose - has on/off switch and pressure switch in pump will cut pump out once pressure is built up
• External pickup/bucket hose
• Fresh water tap hose

Water-HUB Installation Guide. Can It Really Be That Simple?

Plumb up to three water source inputs: fresh, tank and alternative. Then plumb the two outputs: heated and cold. (e.g. heated to the shower, cold to the tap) Then run in a 12V power source. And you are done! Yes! It really is that simple. There are two switches on the hub so you can select which water you went to use, and the hub does the rest. It even controls the warm temperature to almost eliminate wastage as water gets to desired temperature. Just open the taps on the outputs to select which water you want to use. YES!! It’s that simple!  It saves a bunch in installation time, and anyone can do it. It’s that simple. 

No more need for plumbing specialist expertise when building water set in 4WDs, RVs, boats, and even dwellings that use a non-mains water supply.

All the difficult stuff is done for you, with the best quality components available today.