Product Details

Product

Amptron Lithium 12V 150Ah / 100A Continuous Discharge LiFePO4 Battery
Amptron Lithium 12V 150Ah / 100A Continuous Discharge LiFePO4 Battery

AMPTRON LITHIUM 12V 150AH / 100A CONTINUOUS DISCHARGE LIFEPO4 BATTERY

Regular price $1,399.00
AT-LFP-12-150AV02
Unit price  per 
GST included. Shipping calculated at checkout.
Regular price $1,399.00
AT-LFP-12-150AV02
Unit price  per 
This product is considered Dangerous Goods and has a $49 flat shipping rate.(Australia Only)

AMPTRON 12V 150Ah / 100A continuous discharge Lithium LiFePO4 Batteries are an alternative replacement (AR) for any application currently using a deep cycle Gel, AGM or Flooded Lead Acid battery. The maximum continuous discharge current is 100A and peak discharge current 200A for 10 seconds.

Our Lithium batteries use a high quality robust integrated Battery Protection System (BPS) and is designed to manage and control all the battery protection requirements. The BPS maximizes the performance of the battery by automatically balancing the cells and protecting them from being over charged or over discharged. Our integrated BPS design is what allows our batteries to be used as an AR "Alternative Replacement" for any application requiring durable, high quality, dependable and lightweight Lithium Batteries.​

 

 
Item
Specification
Description/Remark
Model
AT-LFP-12-150-AV01
12V 150Ah Lithium LiFePO4 battery
Chemistry
Lithium Iron Phosphate (LiFePO4)
   
Battery dimensions
L-405mm x W-175mm x H-220mm 
Height to top of fixed Handel  240mm
Weight
19kg
   
Cell type
3.2V 75Ah
Prismatic  
Battery module
8 pcs 3.2V 75Ah cells, 2 parallel & 4 serial
  
Casing material for single cell
Nickel plated steel
   
Standard capacity(0.2C5A)
150 Ah / 1920Wh
  
> 2000 cycles at 100% Depth of Discharge (DoD)
Cycle life
Under normal usage where the DOD is <80%, cycle life is expected to be up to  5000 cycles
Rated voltage
12.8V
Working voltage per cell: 3.2V
Charge voltage
14.6V
Max. charge voltage per cell: 3.65V
Cut-off volate
10V
Discharge voltage per cell: 2.50V
Depth of discharge (DoD)
100%
Batteries can be discharged to 100% of the rated capacity
Standard charge current
30A
0.2C
Charging time
Approximately 5 hours
When charging from low voltage cut-off point
Optimum charge current range
30A (0.2C) to 75A (0.5C)
Cell max voltage < 3.9V
Rapid charging
Max. charge current 100A (0.67C3A)
Temperature increase falling within 15°C is normal. Over 15°C will affect the service life of the cells.
Max continuous discharge current
100A
1C, cell min voltage> 2.0v
Peak discharge current
200A
2C (5 seconds)
Discharge performance in normal temperature
20A (0.2C3A) ≥ 100
1C3A ≥90%
   
Operating temperatures
Standard 0℃~45℃
Discharge -20℃~65℃
Storage -20℃~45℃
   
Impedance (Max, at 1000Hz.)
≤ 45mΩ
   
Storage performance
Capacity can be kept ≥ 80% in storage for 12months
Battery should be kept at -20℃ ~ 45℃ where it’s dry, clean and well-ventilated.
​Connecting Terminals  Pos (+)  & Neg (-)
M8
 

Heavy Duty - Built in Battery Protection System

AMPTRON lithium batteries have a built-in Battery Protection System (BPS) designed to prevent damage to the cells from almost any external accidental occurrence that would normally cause damage. The internal BPS will automatically disconnect to prevent damage to the cells if the battery drains below 10 volts. It will automatically reconnect when the charger is turned on. This protects the battery from over-discharging and damaging the cells. This technology also protects the battery from overcharge, short circuit and reverse polarity.
​
Internal Features:
  • Low Voltage Protection Switch - Automatically disconnects around 10V
  • Over Voltage Protection Switch - Automatically disconnects around 14.8V
  • Short Circuit Protection Switch - Automatically disconnects
  • Reverse Polarity Protection Switch - Automatically disconnects
  • Internal cell balancing   - Automatically balances cells
  • Charge Balancing - Independent balancing for multiple batteries connected in parallel or in series.
  • This Battery Protection System is designed to last throughout the life of the battery and provide reliable power for thousands of cycles.
​
CELL BALANCING
The BMS balances the cells by sending more current through the length way circuit boards and into cells with a lower voltage. The BMS will also discharge cells that exceed 3.65V during charging. ​

THERMAL FUSE
Internal Cell Safety Fuse
Our latest cell technology is manufactured with a internal thermal safety fuse between the anode and cathode that will break and disconnect in the unlikely event the cell would begin to overheat.
 
SAFETY VENT
High pressure safety vent
Each cell has a high pressure safety vent that will flip open to release energy and prevent explosion.
 
ELECTROLYTE
Flame Retardant Electrolyte
Our cells are manufactured with our patented flame retardant additive in our electrolyte.
 
EXPLOSION PROOF
Explosion proof Nickel plated steel
Every AMPTRON cell is manufactured in our explosion proof Nickel plated steel Prismatic case.
Â