Roadvision Airwire Universal Remote Control Wiring Loom Kit for Driving & Work Lamps RCWL


Fitting driving lamps has never been so easy! Airwire™ takes all the effort out of installing driving lamps. A simple kit that can be easily fitted by workshops or the DIY handyman. No need to drill holes in the firewall or mount switches in the dash. Simply mount the receiver box and connect directly to the battery, splice in the high beam feed, plug in the driving lamps and cigarette lighter transmitter and you are done. It’s that easy.


For years, driving lamp installation and wiring practices have remained the same – complex wiring inside the engine bay, passing through to the interior cabin of the vehicle. Vehicle dashes and interior panels have to be removed, unsightly holes have to be cut in dashes, and firewalls and complex cabling and relays have to be installed in the engine bay. This is a simple operation for a trained professional with the correct tools and cable accessories, but quite challenging for the average home handyman.

Now, thanks to AIRWIRE™ Remote Controlled Wiring Loom, the latest innovation from Roadvision, the DIY installation of driving lamps has been completely revolutionised.

Roadvision AIRWIRE™ cleverly transmits a radio signal from inside the vehicle cabin to its receiver module mounted inside the engine bay, eliminating the need for cables running through the firewall. The switch is ingeniously mounted on the end of the cigarette lighter plug (the transmitter module) removing the need to mount and wire up a switch in the dash. This means that interior panels, including the dash, don’t have to be removed as it simply plugs into the cigarette lighter socket.

Installation of AIRWIRE™ inside the engine bay is just as simple. The receiver box is simply mounted and the two eye terminals are connected to B+ and B-. Using a standard set of pliers and the gel filled 3M connector, the head lamp is simply tapped into at the high beam feed. The driving lamps are then plugged in using the Deutsch plugs or push on terminals. Roadvision AIRWIRE™ Remote Controlled Wiring Loom is easy to install and can be done by a home handyman in less than 30 minutes.

Roadvision AIRWIRE™ is compliant with ADR fitment requirements for driving lamps through its connection to the high beam feed and separate transmitter switch operation. Roadvision AIRWIRE™ is suitable for positive or negative switching head lamps, is fully potted and sealed from water ingress and has a five metre transmitter range. Roadvision AIRWIRE™ can be installed in almost any vehicle, has a multi-voltage input and 20 amp maximum output and is suitable for Halogen, HID and LED lamps.

Roadvision AIRWIRE™ is so versatile that it can also be used for work lamps, marine deck and fly-bridge lamps or any application where wiring in an external switch is tricky.

  • Easy to install complete DIY Kit
  • Suitable for the home handyman
  • 30 min average install time
  • Requires only basic tools for installation
  • Eliminates drilling holes through the firewall or dash
  • Kit can be easily moved from vehicle to vehicle
  • Multi-volt 9-32V DC input
  • Fully potted electronics & waterproof to IP67
  • 5 metre transmitter range & 3 metre plug & play harness
  • 20A maximum output
  • Deutsch & 3M gel filled connectors
Roadvision Airwire Universal Remote Control Wiring Loom Kit for Driving & Work Lamps RCWL was last modified: by


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.


If you choose pick up when ordering your items through our shop, please wait for us to call you when your items are ready for pick up. This generally takes 1-3 days.

You can then pick up your order from our SHOWROOM:

1/29 May Holman Drive, Bassendean WA-6054

Please note that we do not regularly stock all items in our showroom so please wait for us to confirm it’s ready for pickup or call us to check availability!

Our opening hours are:

Monday: 09:00 am – 4:00 pm
Tuesday – Friday: 09:00 am – 2:00 pm

or by appointment

Find more information about our showroom here.



We exclusively deliver to Perth & Surroundings – please scroll down to see a the delivery areas.


  • STANDARD $15 – Generally takes 1-3 business days, in rare cases it may take longer.
  • EXPRESS $30 – Next day delivery if ordered before 12pm on a business day.

NOTE: Products from the following brands may take longer due to manufacturers’ stock levels. If this is the case we will contact you.

Some products are not available for express delivery due to the same reason. If this is the case you can see a note at the bottom the products description.
Dolphin, Dometic, Intervolt, Latronics, Noco, Projecta, Wema

See ‘Express delivery exempt products’ below for more information.

We try to be as accurate as possible with our stock information and delivery times. However sometimes delays occur due to manufacturer’s stock levels. If we are not able to deliver a product on time, we will contact you immediately. Please make sure you provide us with your CORRECT CONTACT DETAILS (phone & email) to unsure we can reach you.



If you are at the border of the delivery area and not sure if we deliver to your address, please don’t hesitate to contact us and we will check for you.



Express delivery exempt products

Products from certain brands might have longer delivery times due to the manufacturer’s stock levels and are not available for express delivery. This delivery restriction is applied on products including but not limited to the following brands: DOLPHIN, DOMETIC, INTERVOLT, LATRONICS, WAECO, WEMA

Reasons for order delays

  • Entry of an incorrect or incomplete address during checkout.
  • The address had no-one to sign for the parcel, and “Authority to Leave” was not selected at checkout.
  • Incorrect payment information was entered against the order. Please double check all details at time of checkout as your order will only be created upon receipt of payment.
  • In the event an order is flagged for verification we may need to get in contact via phone before dispatching some orders. Personal details may need to be confirmed for fraud prevention if we are unable to verify the shipping destination to protect the card holder, and this may delay shipping.
  • Occasionally if a particular item is in high demand, we may need to supply the product from outside of our standard delivery network. This can cause delays in dispatch. If your order is not received within the quoted delivery period please contact us. We will generally respond to online enquiries within 24 hours.



All deliveries are done by ourselves or by a courier service so products cannot be delivered to PO Boxes. At the checkout you will have to choose between SIGNATURE REQUIRED and AUTHORITY TO LEAVE.

We recommend all deliveries be shipped to a location that is attended during business hours, whether that is a home or work address, to minimise any inconvenience and redelivery fees.

Authority to leave

This gives the delivery person the permission to leave your order in front of the house if no one opens the door at delivery.

PLEASE NOTE: If the address is unattended Perth Pro Auto Electric Parts can’t be held liable if the order is stolen. Only choose this option if you think the address is a safe place to have an item sitting in front of your door. Do NOT choose this option if you live in an apartment building or block of flats as the delivery person may not have access to the building and won’t be able to leave it in front of your door.

Signature required

This means the delivery person can only leave your order if someone answers the door and signs for the receipt of the order.

PLEASE NOTE: Only choose this option if the address is attended during business hours as if no one is present to sign for the receipt, your order has to be taken back and you may have to pay a redelivery fee.



Please see our Returns Policy for further information.

Roadvision Airwire Universal Remote Control Wiring Loom Kit for Driving & Work Lamps RCWL was last modified: by