The Cel-Fi GO Telstra Trucker/4WD EDGE Pack is recommended to gain the maximum coverage when you have an existing bull bar and do much of your travelling around coastal and mountainous areas.
The Cel-Fi GO Telstra Kit is a top choice for 3G/4G Repeaters suited for Truck/4WD | Perth Pro Auto
The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your 4WD or Truck. Supporting voice and mobile internet for multiple mobile devices, dropped calls and slow internet are a thing of the past.
Telstra, Aldi Mobile, Boost Mobile, Woolworths Connect
Supports 3G (850) and 4G (700/1800) – only one band at a time
Designed for 4WD & Truck applications
Includes external and internal antennas
100dB of system gain
Locked to Telstra’s Mobile Network
Band Selection Button
Cel-Fi GO will boost a single band at a time: 3G(850) or 4G(700 or 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
Cel-Fi GO will provide coverage for 20+ active users depending on the mobile network capacity in your area.
The 4g/LTE bands can only be utilised for data if both the smartphone and the local network support Voice over LTE. You will need to check your smart phone to confirm it has VoLTE functionality.
Cel-Fi GO mobile version will not boost in areas where the signal is already very strong. If the signal is better than -80dBm (3G) or -95dBm (4G) the mobile GO version will cease to boost to ensure a degraded level of service is not experienced.
Benefits of Cel-Fi Go
PROVIDES COVERAGE FOR AUTOMOTIVE APPLICATIONsimply instal cel-fi GO inside your vehicle and enjoy having great 3G or 4G mobile reception. No longer will you need to stop or drive to a particular spot to be able to make a improve the mobile coverage for all types of vehicles from cars to trucks, to far machinery and caravans, all with only a change in antenna.
INCREASE MOBILE DATA SPEEDSlow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal on the go, you will be able to relate to the frustration of trying to access email or the internet. Cel-Fi GO will amplify the available LTE or HSPA mobile signal and increase your data speeds dramatically. Email, internet, video and social networking speeds can achieve up to 4x improvement. Note: The 4G/LTE bands can only be utilised for data (no calls) unless both the smart phone and the local network support Voice over LTE.
EXTENDS MOBILE PHONE BATTERY LIFEMobile phones use a lot more energy when in poor signal areas. The phone adjusts its output power to compensate in an attempt to boost the poor signal. As a result he phone will consume a lot more battery power. Using Cel-Fi GO, your indoor mobile signal should be high and the battery will last noticeably longer for you to work and talk while on the move.
ELIMINATES DROPPED OR MISSED CALLSNever miss or lose an important call while on the move because of coverage issues again. Cel-Fi GO will provide improved coverage in your vehicle so you can be contacted when required. No longer do you have to put up with calls dropping out or terminating during conversation while on the move.
IMPROVES VOICE QUALITYThe quality of a voice call is usually determined by the phone’s signal strength and nearby interference. With improved signal strength inside your vehicle, Cel-Fi GO mobile version will provide crystal clear voice quality for cell phones.
The mobile solution approved by Telstra and meeting ACMA regulations
Amplifies and disburses a 3G (HSPA) or 4G (LTE) Telstra mobile signal. Note: Cel-Fi GO will only boost one frequency band at a time
Provides manual selection of 3G or 4G or utilise the auto band selection. Band selection is via a button on top of the unit or using the WAVE App
Once installed, Cel-Fi GO has Automatic Gain Control (AGC) continuously monitoring system path loss to deliver maximum gain up to 70dB
Provides mobile coverage in and around the vehicle/ area
Rigid cast-aluminium casing with IP54 rating, suitable for adverse environments
Network-Sade protection that monitors mobile base station in real time to ensure no interference with the normal function of the mobile network
Cel-Fi GO supports Bluetooth Connectivity or Micro USB connections to Nextivity’s smartphone or PC WAVE app
Intuitive WAVE app allows quick and easy installation by a trained technician
Your Cel-Fi GO is approved if installed correctly. Only qualified resellers who have undertaken product training should perform installation of Cel-Fi GO.
Mobile version Cel-FI GO’s require you to take into account the vehicles safety mechanisms such as airbags, ABS, traction control, stability control and auto electrics. Incorrect installation may result in water leaks, electrical failure, battery damage, fusing of internal wiring and cables or risk of FIRE. Misuse of this equipment could result in injury and equipment damage.
Cellular Band: 3G 850 & 4G 700/1800 MHz (one frequency band at a time)
System Gain: up to 70dB
Dimensions: 28mm x 87mm x 255mm
Operating temp: 0 to 65 degrees Celsius
Storage temp: -25 to 65 degrees Celsius
Relative humidity: 0 to 95%, noncondensing
Power: 12 VDC via external supply or cigarette socket
External supply: 100 to 240 VAC, 47-63Hz
Power consumption less than 15W per unit
SMA Female Outdoor Antenna Connector
SMA Female Indoor Antenna Connector
(approved antenna are supplied with the units)
Cel-Fi GO Mobile for Telstra
Blackhawk Trucker EDGE 92cm Antenna (698-960/1710-2170 MHz) with 4.5m of PT240 cable
Adhesive Indoor Antenna with 3m cable
12v Cigarette Lighter DC Power Supply
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device