The EGON Water-Hub with Hose Kit is a remarkable cost and time-saving device. A simple, extremely robust pre-plumbed box with water in and outputs, pump, valve and temperate control value all in a single, easy to fit unit. It makes water system install quick and clever.
The EGON Water-Hub and Hose Kit is a top choice for waterpumps with a simple pre-plumbed design | Perth Pro Auto
No more need for plumbing specialist expertise when building water set in 4WDs, RVs, boats, and even dwellings that use a non-mains water supply.
All the difficult stuff is done for you, with the best quality components available today. Make huge savings in labour time, reduce complexity and improve quality of your installations.
Dimensions 300H X 300W X 150D | Weight: 8.7kg
MAKING WATER SYSTEM INSTALLS QUICK AND CLEVER.
FOOL PROOFOne of the biggest challenges of water installations is the lack of expertise, and the resultant quality shortfalls. With the Egon Water-Hub, there are no need for plumber's tape, special tools, or to go shopping for parts.
Hose and Connection Kit for EGON Water Hub. Kit consists of Shower Hose, Tap Hose, External Pickup Hose and 3 x 90 Degree Brass Fittings to connect a tank hose and 2 x Hot Water System hoses.
Temp control mixes cold + hot to get temp right every time.
Suitable for shower and kitchen, cold and hot.
Clean drinking water outlet.
Tank input connection.
Alternative external pickup / bucket connection.
Grey water tank connection with failsafe contamination protection.
3 x 90 degree brass fitting with 3/8 BSP thread to screw into water hub and barbed fitting for 10mm inner diameter hose
Wall Mounting Bracket Kit. 4 x Mounting Adapter to be screwed through the back of the unit in case it is not possible to directly mount unit through the back. Holes in corners are pre drilled and mounting kit includes fasteners.
The unit is marked with input and output instructions and every unit comes with an installation guide. These guides are backed up by installation videos on our YouTube channel. (Installation videos will be available March 2021).
Steel, waterproof case suitable for exterior or interior fitting.
Reversible lockable lid for fitting versatility.
Standard pipe thread sizes so no special parts needed.
Optional pipe kit available. Click here for complete kit.
Steel heavy-duty mounting kit included.
Supplied with 4m cable for 12V connect.
Requires 12V input. Max 10 amps.
External source. e.g. bucket, grey tank.
Hot water heater/boiler.
Shower via thermostat.
Tap, direct from tank.
WHAT YOU NEED TO DO . . .
Buy it. It's supplied with a 16-piece heavy-duty steel mounting kit.
Mount it in a place inside or out, where access via the door is reasonably easy.
Run pipes from the tank and/or water boiler/external intake.
Run pipes to your tap and/or shower.
Standard threads have been used so if you want to build a system, additional fittings can be found at any hardware store.
Run 12V dc to the supplied 4M length of wire.
You're done. It's that easy.
Now you have hot/cold accurately temperature-controlled water on demand.
12v power supply needs to be connected to 4m 4mm twin core cable (can be shortened for installation) and needs an external 15A fuse.
The unit is equipped with 2 x on / off push button switch on housing for fresh water / tank pump (blue led) and external pickup / dirt water pump (green led).
Material: Cold-rolled steel
Construction: Totally reversible cabinet. Wall mounting by 4 x Ø9mm holes. Double fold to prevent water from entering cabinet also acting as a gutter. Earthing stud standard. Drainage hole on the base of cabinet to prevent condensation.
Door: 110˚ reversible opening. Concealed and removable hinges with quick assembly and disassembly pins. Continuous polyurethane sealing gasket for higher IP rating. Metal 5mm double bit lock.
Finish: Coated in Hardened RAL 7035 Grey, UV Tolerant Polyester Powder coat. Corrosion resistance according to UNE-EN62208. Ratings & UNE-EN 62208 & UNE-EN61439-1-3, UL508A, Bureau Veritas
Approvals: according to UNE-EN62208.
Dimensions 300H X 300W X 150D
Self-priming and can be run dry without harm. It provides up to 1.2 gallons per minute. Miniature multi outlet water pressure pump serves 1 or 2 3/8” (10 mm) outlets at any one time. This compact automatic demand water system pump has a built-in pressure switch, which automatically starts and stops the pump when faucet is opened and closed.
2 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
All Inlet / Outlet fitting sizes 3/8 BSP and are closed with a grub screw when the unit is being delivered to make it possible to use only a few connections without getting a water leak from open connectors. For example if you don’t want to use a hot water system just leave the blanks in the connections for the hws connectors and use your water hub without a hot water system.
Tank and hot water system connectors: 3 x 90 degree brass fitting with 3/8 BSP thread to screw into water hub and barbed fitting for 10mm inner diameter hose
EGON takes a fresh look at product shortfalls and the needs of the adventure motoring, sail boats cruising and recreational vehicle builds.
Our first product is a remarkable cost and time saving device called a DC-Hub. Imagine a simple, extremely robust product that considerably reduces workshop time, but also does away with the need for specialist expertise when wiring DC setups. If you are building and installing DC electrics into 4WDs, recreational vehicles, boats of all sizes, and even dwellings that run on solar-charged DC setups, this is a marvellous, cost saving device. The EGON DC HUB is as well available on our website.
Our second is a Water-Hub. Imagine a simple, extremely robust pre-plumbed box with water in and outputs, pump, valve and temperate control value all in a single, easy to fit unit. Water in from multiple sources to water out, temperature controlled to multiple outlets. Simple and marvelously practical.
Like the DC-Hub, the EGON Water-Hub is unique in the true sense. Don't waste your time looking for another equivalent. There isn't one!
Delivery - Pickup or Shipping
We offer you a convenient shipping and delivery service or you can simply come and pickup your order from our shop.
We offer worldwide shipping. If you require express shipping please contact us on +61861553932 and we will happily organise this for you.
If you choose to pickup your order, we will call you when your items are available. This generally takes between 1-3 business days. Please note that we do not regularly stock all items in our shop so please wait for us to confirm they are ready for pickup or call us to check availability.