The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed specifically for use in LiFePO4 battery applications as a system to protect the lithium battery from being excessively discharged by auxiliary loads.
The SBI12-LLD is a microprocessor-controlled Load Disconnect Isolator. The SBI12-LLD is designed for use in lithium battery applications (LiFePO4) as a system to protect the battery from being excessively discharged by auxiliary loads, enabling the auxiliary battery to remain above the level at which internal protection circuitry would activate. Falling below this threshold would prevent many chargers from recharging the battery.
Put simply, once the auxiliary battery has been overly discharged, the Load Disconnect Isolator will turn off any connected loads. Similarly, if the battery climbs back above a suitable level, the Load Disconnect Isolator will restore power to the connected loads.
SPIKE PROTECTION
The SBI12-LLD Smart Start battery isolator incorporates a number of spike protection components specifically designed to reduce the risk of damaging the unit. It is also designed to prevent any spikes generated by the solenoid coil from affecting vehicle equipment.
FEATURES
Overmould design
Compact in size and easy to install
Silver contacts for longer life and suitable for marine applications
Power saving technology
Fault indication
Fully surge protected
MAX. INRUSH CURRENT
400A
MAX. CONTINOUS CURRENT
100A
TURN ON VOLTAGE
11V
TURN OFF VOLTAGE
10.5V
TURN ON DELAY
10 seconds
TURN OFF DELAY
2 seconds
STANDBY CURRENT
<5mA
OPERATING CURRENT
<0.1A
WEIGHT
200 g
HEIGHT
70 mm
WIDTH
75 mm
DEPTH | LENGTH
80 mm
WARRANTY
2 Years
SYSTEM VOLTAGE
12V
OUTPUT VOLTAGE
12V DC
INPUT FUSE RATING
100A
OUTPUT FUSE RATING
100A
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
