Product Details

Victron Energy

Victron MultiPlus  II  12v 3000va Inverter

VICTRON MULTIPLUS II 12V 3000VA INVERTER

Regular price $1,790.00
PMP122305010
Unit price  per 
GST included. Shipping calculated at checkout.
Regular price $1,790.00
PMP122305010
Unit price  per 

 

 

 

 

A MultiPlus, plus ESS (Energy Storage System) functionality

The MultiPlus-II is a multifunctional inverter/charger with all the features of the MultiPlus, plus an external current sensor option which extends the PowerControl and PowerAssist function to 50A resp. 100A. The MultiPlus-II is ideally suited for professional marine, yachting, vehicle and land based off-grid applications. It also has built-in anti-islanding functionality, and an increasingly long list of country approvals for ESS application. Several system configurations are possible. For more detailed information see the ESS Design and configuration manual.

PowerControl and PowerAssist - Boosting the capacity of the grid or a generator

A maximum grid or generator current can be set. The MultiPlus-II will then take account of other AC loads and use whatever is extra for battery charging, thus preventing the generator or grid from being overloaded (PowerControl function). PowerAssist takes the principle of PowerControl to a further dimension. Where peak power is so often required only for a limited period, the MultiPlus-II will compensate insufficient generator, shore or grid power with power from the battery. When the load reduces, the spare power is used to recharge the battery.

Solar energy: AC power available even during a grid failure

The MultiPlus-II can be used in off grid as well as grid connected PV and other alternative energy systems. It is compatible with both solar charger controllers and grid-tie inverters.

Two AC Outputs

The main output has no break functionality. The MultiPlus-II takes over the supply to the connected loads in the event of a grid failure or when shore/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus-II. Loads that should not discharge the battery, like a water heater for example, can be connected to this output.

Virtually unlimited power thanks to parallel (not for the 8k, 10k and 15k models) and three phase operation

Up to 6 Multis can operate in parallel to achieve higher power output. Six 48/5000/70 units, for example, will provide 25 kW / 30 kVA output power with 420 Amps charging capacity. In addition to parallel connection, three units of the same model can be configured for three phase output. But that’s not all: up to 6 sets of three units can be parallel connected for a 75 kW / 90 kVA inverter and more than 1200 Amps charging capacity.

On-site system configuring, monitoring and control

Settings can be changed in a matter of minutes with VEConfigure software (computer or laptop and MK3-USB interface needed). Several monitoring and control options are available: Cerbo GX, Color Control GX, Venus GX, Octo GX, CANvu GX, laptop, computer, Bluetooth (with the optional VE.Bus Smart dongle), Battery Monitor, Digital Multi Control Panel.

Remote configuring and monitoring

Install a Cerbo GX or other GX product to connect to the internet. Operational data can be stored and displayed on our VRM (Victron Remote Management) website, free of charge. When connected to the internet, systems can be accessed remotely, and settings can be changed.

 abcdef

Specifications

 Power Control & Power Assist

YES

Transfer Switch 32A
Max AC input Current 32A
INVERTER
DC Input voltage range 9.5-17V
Output

Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1)

Cont. output power at 25°C (3)

3000 VA

Cont. output power at 25°C

2400 W

Cont. output power at 40°C 2200 W
Cont. output power at 65°C 1700W
Max apparent feed-in power 3000VA
Peak power 5500W
Maximum efficiency 93%
Zero Load power 13W
Zero load power in AES mode 9W
Zero load power in Search mode 3w
CHARGER
AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge Voltage 'absorption' 14.4V
Charge Voltage 'float' 13.8V
Storage Mode 13.2V
Max. Battery charge current (4) 120A
Battery Temperature sensor yes
GENERAL
Auxiliary output YEs (32A)
External AC current sensor (optional) 50A or 100A
Programmable relay (5) yes
Protection (2)  a-g
VE.Bus communication port for parallel *not for 8k, 10k, or 15k models) and three phase operation, remote monitoring and system integration
General purpose com. port Yes , 2x
remote on-off yes
operating temperature range 40 to +65°C (fan assisted cooling)
Humidity (non-condensing) max 95%
ENCLOSURE
Material & Colour Steel, blue RAL 5012
Protection category IP22
Battery-connection M8-Bolts
230 V AC-connection Screw Termianl 12mm2 (6 AWG)
Weight 19KG
Dimensions (HxWxD) mm

546 x 275 x 147

 Power Control & Power Assist

YES

Transfer Switch 32A
Max AC input Current 32A
INVERTER
DC Input voltage range 9.5-17V
Output

Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0,1% (1)

Cont. output power at 25°C (3)

3000 VA

Cont. output power at 25°C

2400 W

Cont. output power at 40°C 2200 W
Cont. output power at 65°C 1700W
Max apparent feed-in power 3000VA
Peak power 5500W
Maximum efficiency 93%
Zero Load power 13W
Zero load power in AES mode 9W
Zero load power in Search mode 3w
CHARGER
AC Input Input voltage range: 187-265 VAC Input frequency: 45 – 65 Hz
Charge Voltage 'absorption' 14.4V
Charge Voltage 'float' 13.8V
Storage Mode 13.2V
Max. Battery charge current (4) 120A
Battery Temperature sensor yes
GENERAL
Auxiliary output YEs (32A)
External AC current sensor (optional) 50A or 100A
Programmable relay (5) yes
Protection (2)  a-g
VE.Bus communication port for parallel *not for 8k, 10k, or 15k models) and three phase operation, remote monitoring and system integration
General purpose com. port Yes , 2x
remote on-off yes
operating temperature range 40 to +65°C (fan assisted cooling)
Humidity (non-condensing) max 95%
ENCLOSURE
Material & Colour Steel, blue RAL 5012
Protection category IP22
Battery-connection M8-Bolts
230 V AC-connection Screw Termianl 12mm2 (6 AWG)
Weight 19KG
Dimensions (HxWxD) mm

546 x 275 x 147

 

1) Can be adjusted to 60 Hz

2) Protection key:

a) output short circuit              b) overload

c) battery voltage too high      d) battery voltage too low

e) temperature too high           f) 230 VAC on inverter output

g) input voltage ripple too high

3) Non-linear load, crest factor 3:1

4) Up to 25°C ambient

5) Programmable relay which can be set for general alarm, DC under voltage or genset start/stop function. AC rating: 230V / 4A, DC rating: 4A up to 35VDC and 1A up to 60VDC