Victrons IP65 Rated 500A/50mV SmartShunt is a powerful battery monitor with Bluetooth on board for monitoring on your mobile phone, tablet or computer via the VictronConnect App or connected to a Victron GX Device.
The 500A SmartShunt IP65 is an all-in-one battery monitor, only without a display. Your phone acts as a display. The SmartShunt connects via Bluetooth to the VictronConnect app on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more. Alternatively, the SmartShunt can be connected and read by a GX device. Connection to the SmartShunt is made via a VE.Direct cable.
The SmartShunt is a good alternative for a BMV battery monitor, especially for systems where battery monitoring is needed but where less wiring and clutter is wanted.
The SmartShunt is equipped with Bluetooth, a VE.Direct port and a secondary connection that can be used for monitoring a second battery, midpoint monitoring or a temperature sensor.
With its IP65 Water Resistant rating, the SmartShunt is more ideal for areas prone to receiving an ingress of water such as an engine bay in a 4WD that does creek crossings, or in a marine environment where the battery area is relatively exposed to the elements.
Monitored Battery Parameters include:
Battery State-of-Charge (SoC)
Voltage of up to 2 batteries
Current Load
Time to go
Extensive historical information
... and much more
Auxiliary Input Options:
The SmartShunt can do more than comprehensively monitor your main battery bank - additionally, you can choose to either:
Monitor the voltage of a second battery, for exmaple the starter battery or;
Connect a temperature sensor (optional accessory) for temperature compensated charging or;
Monitor the midpoint voltage of your battery bank (cable included) to keep an eye on battery health.
Connection to any Victron GX Device
The SmartShunt also features a VE.Direct port so can also be connected to any device in the GX range including the Colour Controller and Cerbo GX via a VE.Direct cable.
Specifications
SmartShunt IP65
500 A
Supply voltage range Current draw
6,5 - 70 VDC < 1 mA
Input voltage range, auxiliary battery
6,5 - 70 VDC
Battery capacity (Ah) Operating temperature range Measures voltage of second battery, or temperature, or midpoint
1 - 9999 Ah -40 +50 °C (-40 – 120 °F) Yes
Temperature measurement range VE.Direct communication port
-20 +50 °C Yes
RESOLUTION & ACCURACY
Current
± 0,01 A
Voltage
± 0,01 V
Amp hours
± 0,1 Ah
State of charge (0 – 100 %)
± 0,1 %
Time to go
± 1 min
Temperature (if optional temperature sensor connected)
± 1 °C/°F (0 – 50 °C or 30 – 120 °F)
Accuracy of current measurement
± 0,4 %
Offset
Less than 20 / 40 / 80 mA
Accuracy of voltage measurement
± 0,3 %
INSTALLATION & DIMENSIONS
Dimensions (h x w x d)
500A: 46 x 120 x 54 mm 1000A: 68 x 168 x 75 mm 2000A: 68 x 168 x 100 protection
Protection category
IP65
STANDARDS
Safety Emission / Immunity Automotive
EN 60335-1 EN-IEC 61000-6-1 EN-IEC 61000-6-2 EN-IEC 61000-6-3 EN 50498
Cables
Two 1.5 m cables with 1 A fuse, for ‘+’ connection and starter battery or midpoint connection
VE.Direct cable
1.5 m cable with a VE.Direct socket. Note that a (not included) VE.Direct cable is needed to connect a GX device.
Temperature sensor
Optional (ASS000100000)
A note regarding the range of the Bluetooth signal
The shunt and the electric cables do negatively influence the range of the Bluetooth signal. The resulting range of 10-15 meter is however satisfactory in most cases. The proximity of other electrically conducting elements, such as the metal chassis of a vehicle or seawater around the hull if a boat, may reduce the range of the Bluetooth signal to an unacceptable level. The solution in such a case is to add a VE.Direct Bluetooth Dongle (ASS030536011) to the system, and to switch off Bluetooth in the SmartShunt.
Choosing a selection results in a full page refresh.
Press the space key then arrow keys to make a selection.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device