NEW BluEdge 12V 100Ah / 200A Continuous Discharge LiFePO4 Battery with Bluetooth + RS485 + CAN bus
New AMPTRONĀ® BluEdge 12V 100Ah Lithium LiFePO4 Batteries with Bluetooth are an alternative replacement (AR) for most applications currently using a deep cycle Gel, AGM or Flooded Lead Acid battery. The maximum continuous discharge current is 200A and peak discharge current 400A for 3 seconds.
Ā
These batteries are designed using only the highest quality components and are backed with our 4-year warranty. This includes the use of a robust Battery Management System (BMS), Aluminium encased prismatic cells, solid busbar connectors and internal protection to reduce movement and damaging vibrations. Our batteries can also be placed on their sides providing versatile installation options.
The integrated Battery Management System is designed to monitor, protect, and optimise each cell within the battery. The BMS maximises the performance of the battery by automatically balancing the cells and protecting them from over charging, over discharging, over temperature, and excessive charge or discharge currents. Our integrated BMS allows our batteries to be used as an alternative replacement for most applications requiring deep cycle batteries, however if the charging system does not support a Lithium charge profile, there are some compromises ā please contact Amptron for more information.
Ā
Ā
HEAVY DUTY ā BUILT IN BATTERY MANAGEMENT SYSTEM
AMPTRONĀ® Lithium batteries use a built-in Battery Management System (BMS) designed to automatically disconnect the charging or discharging circuits to prevent damage to the cells and internal electronics from abnormal operation and helps to ensure safe and accurate operation of the battery.
THE BMS PROTECTION FEATURES INCLUDE:
- Low Voltage Protection Switch ā Automatically disconnects the discharge circuit to prevent damage to the cells if the battery drains below a pre-set voltage.
- Over Voltage Protection Switch ā Automatically disconnects the charging circuit to prevent damage to the cells if the battery is being charged above a pre-set maximum voltage.
- Short Circuit and Over Current Protection Switch ā Automatically disconnects the discharge circuit if the load draws currents above pre-set limits.
- Reverse Polarity Protection Switch ā Automatically disconnects the charge and discharge circuits if a reverse polarity condition is detected.
- Thermal protection ā Built-in thermal sensors will automatically disconnect the charge and discharge circuits when excessive temperatures are detected.
CELL BALANCING
The BMS balances the cells through top-end balancing and will discharge cells that exceed 3.65V during charging.
INTERNAL CELL SAFETY
THERMAL FUSE:Ā Our latest prismatic cell technology is manufactured with an internal thermal safety fuse between the anode and cathode that will break and disconnect in the unlikely event the cell would begin to overheat.
SAFETY VENT:Ā Each cell has a high-pressure safety vent that will flip open to release energy and prevent explosion.
FLAME RETARDANT ELECTROLYTE:Ā Our cells are manufactured with a flame retardant additive in our electrolyte.
Ā
Ā
Detailed information and noted points:
Peak discharge current (3 seconds)
400A
Item
|
Specification
|
Description/Remark
|
Model
|
AT-LFP-12-100-BTC-BV10
|
BluEdge Series ā 12V 100Ah / 200AĀ Continuous Discharge Lithium LiFePO4 battery + Bluetooth
|
Size
|
L-330mm x W-175mm x H-220mm |
Ā |
Weight
|
12.5kg
|
Ā |
Connection Terminals
|
M8
|
Ā |
Connection Terminal Torque Limit
|
6Nm |
Ā |
Outer Casing Material
|
ABS
|
Ā |
Casing material for single cell
|
Nickel plated steel
|
Ā |
IP Rating
|
IP66
|
Ā |
Chemistry
|
Lithium iron Phosphate (LiFePO4)
|
Ā |
Cell type
|
Prismatic |
Ā |
Rated Capacity
|
100Ah/1280WH (at0.2C)
|
Ā |
Battery packs in series
|
Supported (4)
|
Ā |
Battery packs in parallel
|
Supported
|
Ā |
Battery cycle life
|
4000 times (0.2C standard charge & discharge)
|
Ā |
Rated voltage / nominal voltage
|
12.8V |
Ā |
Operating voltage range
|
10V-14.6V
|
Ā |
Shipping voltage
|
11-14V |
Ā |
Recommended charge voltage |
14.4V
|
Ā |
Cut-off voltage
|
10V / When lowest cell reaches 2.5V
|
Ā |
Depth of discharge (DoD)
|
100% Recommended DoD 80%
|
Batteries can be discharged to 100% of the rated capacity
|
Standard
(Recommended charge current)
|
20A
|
Ā |
Charging time at recommended charge current
|
4-5 Hours
|
Ā |
Maximum charge current
|
100A
|
Ā |
Max continuous discharge current
|
200A
|
Ā |
Peak discharge current (3 seconds)
|
400A
|
Ā |
Internal resistance
|
ā¤ 20mĪ©
|
Ā |
Operating power consumption
|
ā¤ 25mA
|
Ā |
Operating temperature
|
Charge: -0Ā°Cļ½55Ā°C (Ambient)
Discharge: -20Ā°Cļ½60Ā°C (Ambient)
|
Ā |
Storage temperature range
|
Within 2 months -20Ā°Cļ½40Ā°C
Within 6 months -10Ā°Cļ½35Ā°C
|
Ā |
Recommended storage temperature
|
20Ā°CĀ±5Ā°C
|
Ā |
Storage humidity range
|
10%-90%
|
Ā |
Recommended storage duration
|
Charge to 13.3V or 40-60% SOC
every 6 months
|
Ā |
Cell over charge protection
|
3.65VĀ±0.05V
|
Ā |
Cell over discharge protection
|
2.5VĀ±0.1V
|
Ā |
Charging over current protection
|
105AĀ±5A (30s)
|
Ā |
Discharging over current protection
|
1st 210A (30s)
2nd 420A (2s)
|
Ā |
Short circuit protection
|
1000A (560us)
|
Ā |
Ā
Downloadable PDF User Manual
Ā
Battery warranty policy