AMPTRON LITHIUM BATTERY 12V 100AH / 175A CONTINUOUS DISCHARGE LIFEPO4 SLIMLINE METAL BLADE W/ BRACKET KIT

AMPTRON® lithium batteries have a built-in Battery Protection System (BPS) designed to prevent damage to the cells from almost any external accidental occurrence that would normally cause damage. The internal BPS will automatically disconnect to prevent damage to the cells if the battery drains below 10 volts. It will automatically reconnect when the charger is turned on. This protects the battery from over-discharging and damaging the cells. This technology also protects the battery from overcharge, short circuit and reverse polarity.
​
Internal Features:

• Low Voltage Protection Switch - Automatically disconnects around 10V
• Over Voltage Protection Switch - Automatically disconnects around 14.8V
• Short Circuit Protection Switch - Automatically disconnects
• Reverse Polarity Protection Switch - Automatically disconnects
• Internal cell balancing   - Automatically balances cells
• Charge Balancing - Independent balancing for multiple batteries connected in parallel or in series.
• This Battery Protection System is designed to last throughout the life of the battery and provide reliable power for thousands of cycles.

​
CELL BALANCING
The BMS balances the cells by sending more current through the length way circuit boards and into cells with a lower voltage. The BMS will also discharge cells that exceed 3.65V during charging. ​

THERMAL FUSE
Internal Cell Safety Fuse
Our latest cell technology is manufactured with a internal thermal safety fuse between the anode and cathode that will break and disconnect in the unlikely event the cell would begin to overheat.
 
SAFETY VENT
High pressure safety vent
Each cell has a high pressure safety vent that will flip open to release energy and prevent explosion.
 
ELECTROLYTE
Flame Retardant Electrolyte
Our cells are manufactured with our patented flame retardant additive in our electrolyte.
 
EXPLOSION PROOF
Explosion proof Nickel plated steel
Every AMPTRON® cell is manufactured in our explosion proof Nickel plated steel Prismatic case

Specifications

Item	Specification	Description/Remark
Model	AT-LFP-12-100HV01	12V 100Ah / 175A Continuous Discharge Lithium LiFePO4 blade battery​ - Metal Case
Chemistry	Lithium Iron Phosphate (LiFePO4)
Battery dimensions	L-635mm x W-260mm x H-60mm
Weight	16kg
Cell type	3.2V 50Ah	Prismatic
Battery module	8 pcs 3.2V 50Ah cells, 2 in parallel, 4 in series
Casing material for single cell	Nickel plated steel
Standard capacity（0.2C5A）	100 Ah / 1280Wh
Cycle life	​> 2000 cycles at 100% Depth of Discharge (DoD)	Test conditions at 25C, 1C/1C charge & discharge. Higher cycle life can be achieved at lesser charge & discharge rates
Rated voltage	12.8V	Working voltage per cell: 3.2V
Charge voltage	14.4 - 14.6V	Max. charge voltage per cell: 3.65V
Cut-off volate	11.5 to 10V	Cut-off is triggered when the first cell reaches 2.50V
Depth of discharge (DoD)	100%	Batteries can be discharged to 100% of the rated capacity
Standard charge current	25A	0.25C
Charging time	Approximately 5 hours	When charging from low voltage cut-off point
Optimum charge current range	20A (0.2C) to 50A (0.5C)	Cell max voltage < 3.9V
Rapid charging	Max. charge current 100A (1C3A)	Temperature increase falling within 15°C is normal. Over 15°C will affect the service life of the cells.
Max continuous discharge current	175A	1.75C, cell min voltage> 2.0v
Peak discharge current	320A	3.2C (3 seconds)
Discharge performance in normal temperature	20A (0.2C3A) ≥ 100% 1C3A ≥90％
Operating temperatures	Standard 0℃～45℃ Discharge -20℃～65℃ Storage -20℃～45℃
Impedance (Max, at 1000Hz.)	≤ 10mΩ
Storage performance	Capacity can be kept ≥ 80% in storage for 12months	Battery should be kept at -20℃ ～ 45℃ where it’s dry, clean and well-ventilated.
​Connecting Terminals  Pos (+)  & Neg (-)	M8