The AMPTRON® BluEdge colour display with built-in audible alarm, connects to any Amptron BluEdge Battery bank to present key battery system status & data. This information includes SOC, Battery Voltage, Current draw in Amps & Watts, Battery Temperature, Battery used cycles etc. The display also supports presenting consolidated data of a parallel connected battery bank for models that support parallel communication.
Quick and easy setup to display key battery information such as State of Charge (both % and Ah), Voltage, Current draw, Temperature, Cycles etc.
Suitable for compliance with AS/NZS 3001.2:2022 and AS/NZS 3004.2:2014 standards.
Built-in audible alarm that will trigger on adverse battery conditions prior to battery shut-down.
Conveniently view battery alarm codes.
View consolidated battery information for a bank / group of connected BluEdge batteries in one convenient display (for models that supports parallel communication). For the 24V, 36V and 48V batteries – dive down into cell voltage data for each connected battery in the group.
Easy fixing with flexible flush mounted design and range extendable via common UTP network cables. *** Please note, the display unit requires a compatible communications adapter cable to connect to a battery. Refer to the table below for the compatible cable for each battery model.
Other comms cables
AMPTRON BLUEDGE BATTERY PARALLEL COMMUNICATION CABLE - AVIATOR 0.5M
AMPTRON BLUEDGE BATTERY PARALLEL COMMUNICATION CABLE - AVIATOR 1.0M
Preset capacity value
0.1Ah to 999Ah
|
Item
|
Specification
|
Description/Remark
|
|
Model
|
AT-BMSMON-2.4-COL-RS485-AV01
|
BluEdge LCD 2.4-inch full-colour RS485 BMS display
|
| Display |
Full Colour LCD |
|
|
Interface Comms Cable
|
RS485
|
|
|
Weight
|
20g
|
|
|
Size
|
100*70*15mm
|
|
|
Protection Category
|
IP55
|
Not suitable for outdoor use
|
