Product Details


Deluxe Canopy Wiring Packages | Kits
Deluxe Canopy Wiring Packages | Kits


Regular price $7,398.00
Unit price  per 
GST included. Shipping calculated at checkout.
Regular price $7,398.00
Unit price  per 

This canopy wiring kit will enable you to do induction cooking out of your canopy or connect your caravan 15A inlet into your canopy and then run the caravan from your vehicle while you are Offgrid camping.




This kit is ideally paired with the twin auxillary Battery connection Kits where you have the option of Lithium battery size: 100Ah, 150Ah or 200Ah

Connection Kit for Double Aux Battery

If you are not planning to purchase a connection kit above to go with the canopy kit, you will need to purchase a ANL fuse holder separately

With the supplied wiring diagram info on the separate products and the videos on the EGON website this will be a breeze to install yourself. Plus we will be more than happy to help with and point you in the right direction in case you need some additional info while installing your system.

Solar Panels are shippable at extra cost or can be picked up in store. Please call or email with your delivery details so we can get a quote for shipping the panel.

Products Include

  • 2 x Victron Orion T Smart
  • Victron 50A MPPT Solar Controller
  • Junction stud (Black & Red)
  • Victron Cerbo GX
  • Victron Touch 50
  • Victron Smart Shunt
  • 2 x ANL 150A fuses
  • 2x ANL 300A fuses
  • 3000W Victron Multi Plus II Inverter / Charger
  • 2 x National Luna Awning Lights
  • EGON DC Hub Kit
  • Maxi Fuse Kit 
  • Standard Blade Fuse Kit
  • 2 x panel with twin USB, ACC & SB50
  • 200w Redarc Solar Panel
  • 300W KT Solar blanket
  • grey sb50
  • red sb50 housing
  • 2 x Twin midi fuse holder
  • 4 x 50A Midi Fuse
  • KT Solar Mounting Rails

Further Details about these products below

240V Supplies

  • 2 X Twin GPO 10A (for general 240V appliances)
  • Single GPO 15A 9for double hub induction cooker or connection the caravan)
  • 3 x twin GPO mounting spacer
  • 15A Inlet
  • 16A RCD
  • 10A RCD
  • RCD Holder

Wiring Supplies


  • 15x Solid Sleeving NC20
  • 15x Solid sleeving NC12
  • 19mm heat shrink black and red
  • 13 mm heat shrink black and red
  • M16 cable gland


  • 3m red 3B&S (ANL fuse to DCHub)
  • 3m black 3B&S (Shunt to DCHub)
  • 20m 6B&S twin core (for connection from start battery junction studs, junction studs to DC/DC chargers, junction studs to DCHub)
  • 10m 4mm twin (for Accessory / USB outlets)
  • 8m 8B&S twin (for connection from DCHub to Anderson plugs & MPPT to DCHub)
  • 5m red 1b&s cable (ANL to Multiplus)
  • 5m black 1b&s cable (ANL to Multiplus)
  • 10m 6mm twin (for roof solar panel and solar blanket connection)
  • 20m 2.5mm 240V cable
  • 20m 15mm silicone fiber glass sleeving
  • 2 x 1.8m Ve-Direct cable (connect MPPT and Smart Shunt to Cerbo GX)
  • 1 x 2m RJ45 cable (connect Multi Plus to Cerbo GX)
  • USB to VE-Bus programming tool



  • 2 x 70 x10
  • 2 x 70x8
  • 2 x 25x8
  • 2 x 25x10
  • 4 x 16x8
  • 10x 16x10
  • 6x 16x6
  • 2 x 10x8
  • 2 x 10x10
  • 4x 35 x 8


Further Product Details 

Victron Orion Tr Smart

The Orion-Tr Smart DC-DC charger is a professional DC to DC adaptive 3-stage charger with built-in Bluetooth.


For use in dual battery systems in vehicles or on boats where the alternator and the start battery are used to charge the service battery. The unit can be monitored and programmed via Bluetooth and can be remotely controlled via a remote on/off switch.

Victron 50A MPPT

A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.

Victron Cerbo GX

Victron Touch 50

Victron SmartShunt

ANL Fuses

Maxi Fuse Kit LWF-KIT

Standard Blade Fuse KTABF-Kit 

3000W Victron Multi Plus II Inverter / Charger

The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid.
It has all the features of the MultiPlus, plus an external current transformer option to implement PowerControl and PowerAssist and to optimize self-consumption with external current sensing (max. 32A). 

National Luna Awning Light – White/Yellow

These National Luna Awning LED Dual Colour Lights (LED-44360)provide a natural light similar to daylight without any ultra-violet or infra-red emission, making them safe and pleasant to use. These weatherproof touch lights are compact, versatile LED lights that combine exceptionally high efficiency with intense brightness for any interior or exterior 12Vdc/24Vdc application.

EGON DC Hub & Bracket

THIS is a remarkable, new cost and time-saving device is called the DC-Hub. Imagine a simple, extremely robust DC input/output fuse box combination board that reduces workshop time by a large factor, but also does away with the need for specialist expertise when building DC electric setups. All components are wired to this single central hub, including AC chargers, solar panels and DC-chargers. From the same unit are wires run to all accessories, such as fridges, lights, compressors and more. This can all be done without the need of crimps, lugs, shrinks or expertise. All the time-consuming works is done for you!

Triple Flush Mount Housing w/ 50A Plug, Acc and dual USB Ports

This Anderson Style connector features a fascia plate for flush mounting into vehicle cabinets or bodywork. Provides easy connection to solar panels and auxiliary batteries/appliances utilising 50A Anderson connection. This connector also features a car accessory ideal for charging compatible devices. Also features 2 USB ports; 1x 5V 1A and 1x 5V 2.1A, ideal for charging phones, tablets etc whilst users are travelling.


(Optional) Redarc 200W Solar Panel


Install Info (Video at top of page)

2 x 1B&S from Shunt and ANL fuse to inverter needed. Because of the high current draw 1 cable is not enough. The inverter has got 2 terminals for B+ and 2 terminals for GND. Crimp both cables into 70mm lug at Shunt and ANL holder.

Run 2 x 6B&S from start battery through twin Midi holder each DC/DC charger. Join ground onto Junction stud. Run Start battery + directly to DC/DC charger. Run output from DC/DC charger to junction stud. 6B&S from positive and negative junction stud to DCHub.

For added remote access to this system you can order the Victron 3G / 4G modem which connects directly to the Cerbo GX by USB.

All 240V connections must be done by a 240V licensed electrician. All 240V cables need to be sleeved with Silicone Fiber Glass sleeving to achieve an extra layer of circuit segregation in between 12V and 240V cables. This is important to make sure the wiring is being carried out to industry standard.